Home  |  Contact Form  |  Order Form 

Home
About
Barrels
Barrel Thread Sizes
Before_and_After
Bolt
Build
Receiver
Pictures
Ordering Info
Not_Accepted_Junk
Prices
Service Offered
Table of Contents
Legal

 

Price List for Services                                          
You supply parts                                                   

Description

SKU #

Price

Bolt and receiver cleaning

1-8

25.00

Chambering Cleaning  with barrel removed

1-14

25.00

Bolt Truing

1-14r

150.00

Head Space Check

1-13

Free

Barrel Shorten and crowned  with barrel removed

1-14s

100.00

Barrel Crowning any style with barrel removed

1-14c

50.00

Any Bent Bol installed 

1-2f

35.00

Front & Rear Sight Removal (Unfinished)

1-17u

25.00

Scope Mounting (2 Holes)

1-19sm

60.00

Scope Mounting (3 holes or Rock Solid)

1-19smrs

75.00

Scope Mount Lapped  

1-19smf

25.00

Barrel threaded to your size See notes

1-54t

125.00

Barrel/Receiver/bolt Cleaning and Polishing   Exterior

1-33bf

150.00

 

 

 

New heavy barrel fitted to your receiver. Straight length Barrel Includes the barrel of your choice.

762-RFP

495.00

New heavy barrel fitted to your receiver.  Includes the barrel of your choice. For slotted or tapered. Starts at -

762-RFB

595.00

Muzzle brake or flash suppressor installed 35tr 125.00
     
     
Shop rate shop 75.00/hr
 

Combination

Description SKU # Price

Barrel Package

Barrel Shortening
Barrel Threading
Barrel Crowning
Barrel finishing (polished)
 

comb-1 150.00
     

Bolt/Receiver Package


Bolt blue printed and trued
Receiver blue printed and trued
Chambering trued
 

comb-2 250.00
     

Scope Package

Scope Mounting
Scope Mount trued and lapping
 

comb-3 125.00
     

New Barrel package


Bolt, receiver, blue printed, trued and polished.
Chamber  trued and polished.
New barrel of your choice installed.
Machined pillar blocks installed.
Scope mount, mounted and lapped.
 

 

comb-4 600.00
     
Ultimate package

New barrel of your choice.
Barrel Crowning.
Bolt blue printed and trued.
Receiver blue printed and trued.
Chamber trued and polished.
Bolt, receiver, barrel polished.
Scope Mount trued and lapping.
Machined pillar blocks installed.
Ultrasonic cleaning.
Barrel threaded and brake installed.

This package is gunsmith to an optimal accuracy suitable for match/target competition and will perform to 1MOA after break-in.

 

ult-5 900.00

 

______________________________________________________________________________________________________________

SKU: 7.62X54x24R
Price:$350.00 plus shipping

Product Description

7.62 x 54 Raw Gunsmith Edition Blank, 25" x 1.25" 41V50 mils-spec vanadium alloy, 1:11.25 twist, button rifled, thermo stress relieved, precision air gauged,  ready to be profiled and machined to your specifications. 4 lands grooves, .300" bore / .3085" groove

Barrel is treaded and the groove milled. But will need fitting to the receiver.

This barrel is more suited for over 400 yards.

______________________________________________________________________________________________________________
 
SKU:7.62x54x20F
Price:$350.00 plus shipping

Product Description

7.62  Gunsmith Edition Raw Unturned Blank,20" x 1" 4140 CM, 1:9.5 twist, .300" bore / .311" groove, button rifled, thermo stress relieved, air gauged. Ready to be turned  to your  project requirements.

Barrel is treaded and the groove milled. But will need fitting to the receiver.

______________________________________________________________________________________________________________

_______________________________________________________________________________________________________________

Barrel Comparisons

SKU: 7.62X54x24R SKU:7.62x54x20F
25" x 1.25" 20" x 1"
41V50 mils-spec vanadium alloy 4140 CM
button rifled button rifled
thermo stress relieved thermo stress relieved
precision air gauged to .0002" precision air gauged to .0002"
1:11.25 twist 1:9.5 twist
.300" bore / .3085" groove .300" bore / .311" groove

 

Parts
                                          Description                                           SKU              Price

Just the heavy barrel. Extensive fitting and machine required. Barrel is threaded and relief slotted only.

See Barrel

See Barrel

Firing pin spring - New high tech constant force spring. 3--fps 12.50
     


 


Sticky Bolt Polishing - Smooth and polish the bolt and receiver to eliminate bolt problems. (Picture)


Chambering Cleaning and Polish - Chamber is cleaned and polished. This will make the shell extract better, and will remove chamber imperfections. It will also stop the shell from getting stuck in the chamber. (Picture) 


Head Space Check - Head space is check with a GO, NO-GO gauge. This is not the field firing pin protrusion check. (Picture)


Head Space Correction - Corrects a improper head space. Usually happens with miss-matched parts. (Picture)


Barrel Removal - Remove the barrel from the receiver on either the hex or round barrel. (Picture)


Barrel Install -  Install the barrel back onto the receiver on either the hex or round barrel. (Picture)


Barrel Shortening - Shorten the barrel to your length. No less than 16". As measures from the bolt face. (Picture)


Barrel Threading (Full Length) - Thread the barrel to accommodate any muzzle brakes or ? Please specify the threads you want.
Note that you may loose the front sight on some applications. Common sizes are 14mm x 1 mm,.
(Picture)


Barrel Threading (Shorten) -  Barrel is threaded after shortening to accommodate any muzzle brakes or ? Please specify the threads you want. Note that you may loose the front sight on some applications. Common sizes are 14mm x 1 mm, . (Picture)


Barrel Crowning - Crown the barrel to either factory, standard, or target. (Picture)


Bedding - Receiver is bedded to the stock you supply. No modification to the stock. (Picture)


Barrel Floating - The barrel is floated to your stock. (Picture)


Bent Bolt Install (Finished) - Bent bolt is install and finished at the original location at either 0, 10 or 30 degrees. (Picture)


Bent Bolt Install (Unfinished) - Bent bolt is just welded on at the original location, in either 0, 10 or 30 degrees.  You will have to finish it your self. (Picture)


Timney Trigger Install - Your supplied Timney trigger is fitted to your stock. (Picture)


Front & Rear Sight Removal (Finished) - Both sights are removed and the barrel machined and polished smooth. (Picture)


Front & Rear Sight Removal (Unfinished) Both sights are removed and the barrel machined. (Picture)


Scope Mounting (2 or 3 holes) - Any 2 hole scope mounted to your receiver or barrel. (Picture)


Barrel Vise and Action Wrench - The is the tool you will need to remove and install a barrel. (Picture)


Scope Mount Finishing - Your barrel/receiver, scope and mounts are lapped, trued, and mounted. All that you will need to do is adjust the field length and zero it in. (Picture)


Barrel Finishing (Barrel remove from receiver) - Barrel is finished that will be ready for bluing. All imperfections are removed. (Picture)


Barrel Finishing (You removed the barrel) - Barrel is finished that will be ready for bluing. All imperfections are removed. (Picture)


Note on barrel threading. Certain states do not allow barrel threading, as it would consitute an assault rifle. In these sisuation the part (brake, flash suppressor) Would be welded on
and turned down smooth.

 

 


Home | Contact | TOC | About | Legal | News | Q&A | Services | The Work | Combination | Individual | Pics | Thread sizes | Barrels   | Location   |Order Form | Junk | Order Form | Before/After | Receiver | Bolt

Legal Stuff
Copyright 1998
Last modified: 02/12/17

xHit Counter


Hit Counter